A.H. Butar-Butar, J.H. Leong, M. Irwanto
A solenoid supplied by alternating current (AC) voltage generates electromagnetic which has a field area depends on the level of supplied voltage and current flows through the solenoid. The electromagnetic filed can be captured by the other solenoid in the field area. This concept can be applied in a wireless power transfer (WPT) as presented in this paper. The WPT has transmitter coil and receiver coil which each has form of solenoid. The transmitter coil is connected a half bridge circuit to generate AC voltage on the transmitter coil which transferred to the receiver coil. In the experimental set up, the receiver coil is supplied by DC voltage source and it is changed to observe its effect on the voltage and current on the transmitter and receiver coil of the WPT system. © 2020, Institute of Advanced Engineering and Science. All rights reserved.
Fellow of center of Excellence for Renewable Energy, School of Electrical System Engineering, Universiti Malaysia Perlis (UniMAP), Malaysia; Department of Electrical Engineering, Medan State University, Indonesia; Departement of Electrical Engineering, Institut Teknologi Medan (ITM), Indonesia
Research at a Glance
Register to unlock
Topics & SDG Alignment
Register to unlock
Collaboration
Register to unlock
Author Profile (Selected)
Register to unlock
References Overview
Register to unlock
Journal & Source
Register to unlock
Metadata & Integrity
Register to unlock